7/0.2mm def-stan 16-12 part 4 signal cable is designed for high density wiring in process control systems, computers, data processors etc. Optional foil or braid screening provides protection against electronic interference.
Because of the mechanical design of these 7/0.2mm def-stan cables they should not be used for direct connection to mains power supplies.
Signal cables have small conductor sizes and are generally used for wiring between components or within electronic equipment.
Suitable for installation indoors or outdoors in dry or moist areas, not recommended for ducted or direct burial applications.
|7-2-*A:||unscreened (type A)|
|7-2-*C:||tinned copper wire braid screened (type C)|
|7-2-*S:||aluminium/polyester tape screened (type S)|
|* indicates number of conductors|
|Construction – 7/0.2mm def-stan|
|stranded tinned copper conductors|
|polyvinylchloride (PVC) core insulation|
|black PVC outer sheath|
|Technical – 7/0.2mm def-stan|
|conductor make-up:||stranded 7x 0.2mm diameter (0.22mm2 area)|
|bend radius:||7.5 x overall diameter (static)|
|voltage rating:||440V RMS up to 1600Hz operating|
|current rating:||1 amp|
|conductor resistance:||92 Ohm/km maximum @ 20°C|
|temperature range:||0°C to +70°C flexible|
|construction:||according to Bristish Defence Standard 61-12 Part 4|
|flame retardant:||according to EN 50265-2-1, IEC 60332-1|
|core identification:||coloured to British defence standard, see Colour Codes page|
A printable PDF specification is available here: 7/0.2mm def-stan 61-12 part 4 PVC signal cable.
A version with low smoke zero halogen (LSZH) sheathing can be found here: 7/0.2mm LSZH
For PE sheathed or larger versions return to the Data, Signal, Structured Wiring front page.